Home Decor Archives - Page 18 of 42

arts and craft, Beach, clamps, Contributor, decor, Do It Yourself, Home Decor, stencil, Summer

DIY Painted Pool Sign

Hey everyone! Katie again from Addicted 2 DIY. It’s hard to believe, but it’s been two months now since we finished building our dream pool. If you’ve ever wondered what you can learn (and save) by contracting your pool out yourself, I’ve got all of the handy details on my blog. Now that we have our own pool to make fun family memories in, I thought a fun sign would be a great addition. I designed this sign based off of one we had by our pool when I was a kid. According to my mom, this one looks way nicer. She wouldn’t lie to me, right?

To help you make your own sign, I’m also including the free SVG file I created for you to download. Please use it for personal use only.

Here’s what you’ll need for your own sign:

1×2 plywood project board (2’x4′)
3 – 3/4″ x 3′ square poplar dowels
1 1/2″ brad nails
brad nailer
wood glue
220 grit sandpaper
orbital sander
24″ clamps
wood filler
paint colors of your choice
paint roller and/or paintbrush
adhesive vinyl
transfer paper
electronic cutting machine (I have a Silhouette CAMEO)
Welcome to Our OOL SVG file

Start by cutting your plywood down to 12″ x 20″. If you don’t have the ability to do this, you can always ask the helpful employees at the home improvement store. Cut the square dowels on a 45 degree angle to frame the plywood. The inside measurements should be 12″ and 20″.

Frame the plywood with the dowels using wood glue.

Clamp the edges…

…and nail them to the plywood with your brad nailer.

Since the plywood is only 1/2″ thick, you’ll have to be careful not to nail the trim too high. I had one nail go astray, but I was able to get it out with needle-nose pliers. It’s nothing a little wood filler can’t fix later on.

When your entire piece is assembled, sand it with 220 grit sandpaper to get rid of any rough spots. Paint the entire sign, front and back, with your base color. I love using sample size jars of paint for projects like this.

Cut your message out on an electronic cutting machine. Weed out the vinyl design and cover it with transfer tape.

Peel the backing off of the vinyl and carefully center it over the plywood face. Smooth it with a scraping tool (or credit card.) Carefully peel off the transfer paper.

Grab your second paint color and stencil the design with a paint brush or roller. You can mask off the frame of the sign with painter’s tape or paper to protect it from any paint mishaps. I opted to go slow and carefully paint inside the frame.

Once your design is completely stenciled, carefully peel the vinyl off of the face of the sign.

You can leave your sign as it, or distress it a bit. Whatever you like! I love distressing things, but I decided that I really liked a cleaner look for this sign.

I’m so happy with how it turned out! I’m no graphic designer, so I spent several hours coming up with a design that was just right, but it was well worth it. My kids think it’s hilarious! Let’s just hope everyone that comes and visits us will follow the rules! I’m thinking it will look great somewhere near our grotto/water slide. Once we get that area landscaped, I’ll give it a more permanent location. Now that this sign is done, I kind of want to make another one for the waterfall that says “Mt. Wannahockaloogie” from Finding Nemo. We have a “Nemo” mosaic inside the grotto, so it would tie in perfectly. I may be the only one that gets it, but that’s okay.

~learn more about Katie~

Pin for later!

May 27, 2015/7 Comments/by Addicted 2 DIY

accessories, Build It, dark wood, decor, distressing, DIY, Do It Yourself, Home Decor, nailgun, storage, Tutorial

DIY Decorative Ammo Box

I’m super excited to have Pauline from My Altered State joining us today! It’s been a while since we’ve had a guest on Pretty Handy Girl, and this guest was certainly worth the wait! She’s joining us today to show you How to Build a DIY Decorative Ammo Box! This gorgeous crate may be for decorative purposes, but Pauline studied the construction of real ammo boxes to build it the same way the real ones are built. She’s amazing, and I know you’ll understand why in a minute.

I met Pauline at Haven last year, but I’ve been a fan of her blog way before we met. She is an avid upcycler and loves to use salvage materials in her projects.

She has so many fabulous projects, I had a hard time picking a few to show you. Like this fabulous Map Decoupaged Desk/Chair!

DIY Decorative Ammo Box

Or these beautiful Reclaimed Wood Snowflakes!

But, by far my favorite DIY project Pauline has completed so far is this desk and art installation in her kitchen!

And now, Pauline has an easy and unique tutorial for us today! Please clap, cheer and get on your feet for the amazing Pauline from My Altered State!

When I started blogging, I never dreamed that I would one day meet THE Pretty Handy Girl in person, let alone find myself writing a guest post for her. So having said that, imagine how excited I am right now as I write my first guest post on Pretty Handy Girl! Now it’s time to get started. I hope you enjoy my DIY Decorative Ammo Box project.

Wooden military ammunition boxes have been a staple in the vintage repurposing and upcycling world for a while. They are a versatile storage item with an industrial flavor, but sometimes they are hard to find. That’s when I get the urge to build.

In an effort to keep this tutorial from being too lengthy, you can find info on finishing and aging wood in this post. Now let’s get building.

DIY Decorative Ammo Box Materials:

To create a box with the dimensions of 27″ wide x 7″ tall x 10″ deep, purchase the following:

(2) 1″ x 6″ x 6′
(2) 1″ x 2″ x 6′
(1) 1″ x 4″ x 6′
Rope
Gorilla tape
Wood glue
2 Hinges
Drill
Drill bit same thickness of rope
Clamp
Pencil
2″ nails
Nailgun (or hammer)
Miter saw

DIY Decorative Ammo Box Cut List:

2 – 1″ x 2″ cut to 10 1/4″ (cut ends at 30 degree bevel as shown above)
4 – 1″ x 2″ cut to 5 3/4″
2 – 1″ x 2″ cut to 25 1/2″
2 – 1″ x 4″ cut to 25 1/2″
2 – 1″ x 6″ cut to 8 3/4″
2 – 1″ x 6″ cut to 25 1/2″
2 – 1″ x 6″ cut to 27 1/4″

DIY Decorative Ammo Box Instructions:

By copying the design of an authentic ammo box, I will show you how to build this DIY Decorative Ammo Box clear down to the way the handles are attached.

Lay out all your pieces for a “dry run” of the design:

Bottom of box: (1″ x 6″ x 25 1/2″) + (1″ x 2″ x 25 1/2″) + (1″ x 4″ x 25 1/2″) boards.
Front and Back of box: 1″ x 6″ x 27 1/4″ boards
Sides of box (with rope handle): 1″ x 6″ x 8 3/4″ boards

Mark the location for your rope handles (approximately 2″ down from the top of the box.)

During the dry run, notice that the front and back pieces are an inch longer on each side. The stabilizing 1″ x 2″ pieces will rest on the ground, while the four sides of the box rest on the base.

After all the ammo box collecting I’ve done over the years, you’d think I would have noticed how the handles were installed on the real thing. Nope. Never paid attention until now. Here’s a close up of the real thing:

A notch is hollowed out where the end of the rope goes, and then secured in place with nails. This design actually keeps any rope ends or knots from being visible on the inside of the box. Clever.

To create the notch, clamp two 1″ x 2″ x 5 3/4″ stabilizer pieces together. Use the drill bit to drill a hole directly in between the two pieces of wood. Repeat using two more 1″ x 2″ x 5 3/4″ pieces.

Use Gorilla Tape (or duct tape) to seal the end of the rope and keep it from unraveling.

Rest the end of the rope into the notch of the stabilizer 1″ x 2″ and add wood glue to the stabilizer and the taped rope end.

While holding the handle (stabilizer) pieces in place, drive the first nails through the wood, into the rope end and into the side of the box.

After driving two nails into the stabilizer pieces to secure the rope, drive two more nails through the front and back of the box, into the sides of the stabilizer pieces (as shown below.) Then go ahead and glue/nail all the sides together, while keeping it rested on top of the bottom boards. (This will help you keep everything aligned and square.) Once all the sides are nailed together, flip the whole box upside down, and glue and nail the bottom boards into the frame of the ammo box.

Assembling the lid:

The three lid boards are identical to the boards on the bottom of the box: (1″ x 6″ x 25 1/2″) + (1″ x 2″ x 25 1/2″) + (1″ x 4″ x 25 1/2″) The lid boards are secured together by the two 1″ x 2″ x 10 1/4″ cross supports (the two pieces with both ends beveled at 30°.)

Nail on the cross supports about 2″ from outside ends of the lid.

Attach the lid:

For a long time, if there were hinges involved in a project, I walked away in tears. That is, until I discovered this little invention: a drill bit for hinges (affiliate link). I can’t say it enough as this little guy has saved my sanity a thousand times over.

Drill holes for the hinges, about 5 1/2″ from the outside edges of the box, and attach the hinges to the box and the lid.

And that’s it!

You’ve got yourself an ammo box, that has never actually held ammo. What will you do with yours?

I can think of a lot of other things that I might hide inside this box, like Wii remotes. (After I add a lock, of course.) 😉

Visit this tutorial for the “how to” on the stain/distressing techniquefor this ammo box, where you’ll find great tips on aging wood with stain.

Hope you enjoyed!

Did I tell you Pauline is amazing or what?!

May 22, 2015/21 Comments/by Pauline Henderson

Before and After, bloggers, cabinet, chalk paint, Closet renovation, Contributor, DIY, DIY tools, DIYCourage, Do It Yourself, Home Decor, Home Office, painting, Painting & Antiquing Techniques, renovation, Spray paint metal, storage, Upcycling

File Cabinet Makeover Using Chalk Paint

Hey there everyone! I’m working in my craft room to give it a major overhaul and make it a much more functional and creative space. It also doubles as an office that I share with my husband. It’s not always the easiest thing to do, partly because of a lack of organization. One of the biggest projects we’re taking on is completely making over the closet. I’ve already replaced the closet doors with curtains and I love how much easier it has made it to get to things in the closet.

File Cabinet Makeover Using Chalk Paint

This file cabinet is one of the things that goes in that closet. When we finish making over the closet, it will be moved to a more prominent location that will be more visible, especially if the curtains are left open. Because of that, I decided that the boring beige color had to go and I gave it a quick and SUPER cheap makeover!

Here’s what you’ll need to do this project yourself!

File Cabinet Makeover Using Chalk Paint Materials:

Paint Sprayer or paint brushes
2 – sample sized containers of paint (I used Valspar Cut Ruby)
1 – container BB Frösch Chalk Paint Powder
1 – container BB Frösch Premium Finishing Wax (clear)
1 – wax brush or lint free wax cloth

File Cabinet Makeover Using Chalk Paint Instructions:

Unless you plan on painting it, you want to remove all of the hardware off of your file cabinet. I wasn’t quite sure how this would go, but it was extremely easy to remove everything. Just a couple of bolts and I was pretty much done!

To protect the inside of the cabinet from overspray or paint dripping through, cover all of the holes from the inside using masking or painter’s tape.

Time to mix your chalk paint. What I love so much about BB Frösch Chalk Paint Powder is that there’s virtually no waste. You mix as you go. I like using the sample-sized paint containers because they’re cheap and if it’s a project where I’m not sure how much paint I’ll need, at least I know I won’t go way over by buying a quart. The other amazing thing is that there’s virtually no prep work.

Wipe down the file cabinet with a wet cloth and that is it!

If you choose to paint your cabinet using a roller or paint brush, you can get started from this point. If you plan to use a paint sprayer, you’ll need to prep the paint. First and foremost, strain your paint! Lowe’s sells little cone paint strainers (they look like coffee filters) for $.98 a four pack. Once your paint is strained, you need to thin it with water. The HomeRight paint sprayer that I use comes with everything you need to do this, plus great instructions. Read more

April 22, 2015/6 Comments/by Addicted 2 DIY

accessories, decor, Home Decor, Home Office, Home Tour, inspiration, kitchen, Kitchen Renovation, laundry room

The Reality Is…

The reality is that what you see on TV and magazines isn’t real life. We all know this, but do we tend to forget after a while?

I was watching one of those popular HGTV reality shows the other day. This one happened to be filmed in our neighborhood, so I was very familiar with the home that was being renovated. I drove by the house several times while the work was being done and I only saw the show hosts there three times. Those were the few days that filming was being done. The rest of the time (many months of renovating) I never saw the hosts. But, I’m sure you probably already realized this fact. It’s understandable, the celebrity hosts have to record other shows. And there’s no reason for them to stick around and watch joint compound or paint dry.

As you can imagine, I couldn’t wait to see the episode. Before the show aired I ran into the homeowners while walking our dogs. We chatted for a while and I thought they were a super delightful couple. Both polite, kind and fun to talk to. They both shared my love for our neighborhood. When the show finally aired last month, I was dismayed to see this young couple turned into picky, hard-to-please homeowners that fit into the “script” of the show. But, what surprised me most was the final reveal of the “new” value of the improved house. The home was valued above homes almost 1,000 sq feet larger in similar condition in our neighborhood. I shouldn’t have cared much. But, I did.

I’m not sure why I was feeling anger. I’ve known for a long time that reality tv isn’t really reality. Maybe I was angry because I see too many photos and TV shows that portray “real” people living in perfect homes. I think I was angered because the more we watch, the more we read and the more we pin — we begin to forget that what we see isn’t reality. I think we all need a reminder about how unreal “reality” is. Read more

April 8, 2015/60 Comments/by Brittany Bailey

Build It, Decor Adventures, DIY, Do It Yourself, drill, Home Decor, Hot Glue

Hang Art Without a Frame

One way to change the look of a space is to hang up new art. With so many attractive options for your walls, it’s easy to do. Posters, photos, wallpaper and other memorable art can look great, even without a frame. Having art framed professionally can get expensive. Even store bought frames can break your budget. But I have an easier way to hang art without a frame, and it will cost you less than $10.

These maps of Paris and Rome came from a local art supply store for only $5 each. Since they had been sitting in my closet for a while, I thought they would be perfect for this project and give new life to the living room. Each poster will have two pieces of trim, one along the top and one along the bottom.

Materials:

Poster
3/4″ wood
Drill and 1/16 drill bit
Small cup hooks
Small loop chain
Wire cutters
Gorilla tape
Paint and paint brush (optional)