I’m so thrilled to be healthy again, that I’m doing a happy dance (see the video below if you want to witness it.) The pneumonia is gone and my boys are back in school. Can I get a “Woot Woot!”?
The bonus room/art studio renovation is rockin’ and rollin’ again and I have some progress to show you: Read more
Pallet upcycling is all the rage today. But, if you’ve ever tried to actually remove wood planks from a pallet, you know that it is not an easy task. The nails that are used are typically spiral nails and are designed to really grip that wood. And if that’s not enough, they usually shoot 4-5 nails per joint. Sheesh, you’d think they were building a foundation for a 10 ton elephant. Okay, actually it is the foundation that has to hold tons of product as it is lifted by a fork lift. Which explains why harvesting pallet wood can be a labor intensive task.
I figured you’d appreciate it if I shared with you the quickest and easiest way I’ve found to salvage this beautifully rustic pallet wood. Read more
Hey, look at this! Tool Tutorial Friday is back! Today I have a great tool for creating strong joints when building with wood and furniture construction. Today I’m going to show you the simple tutorial for How to Use a Kreg Jig. If you don’t have one yet, you need to purchase one ASAP! This little tool is my go to for for building furniture, frames and just about anything that needs a tight joint.
(I’ve included affiliate links in this post for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)
I use the K4 Kreg Jig It didn’t take me long to figure out how to use it, but I know it would have been helpful to have a step-by-step tutorial when I was first learning how to use a Kreg Jig. For your convenience, this is a quick tutorial.
I was first introduced to the Kreg Jig by my friends Ana White and Rayan with The Design Confidential. These two DIY ladies opened my eyes to pocket screw joints. Be sure to check out their blogs for more tips from the masters!
https://prettyhandygirl.com/wp-content/uploads/2021/07/PHG-logo-tagline-2020-1030x211-R.jpg00Brittany Baileyhttps://prettyhandygirl.com/wp-content/uploads/2021/07/PHG-logo-tagline-2020-1030x211-R.jpgBrittany Bailey2012-07-21 07:00:562019-10-19 14:44:23How to Use a Kreg Jig
Isn’t it frustrating when you are trying to unscrew a screw and the head is stripped? Or some moron painted the screw and now you can’t get your screwdriver into the slots. (I might have been the painting fool mentioned.) Luckily there are two ways to solve this problem. Read more
https://prettyhandygirl.com/wp-content/uploads/2012/05/painted_screw_head.jpg427640Brittany Baileyhttps://prettyhandygirl.com/wp-content/uploads/2021/07/PHG-logo-tagline-2020-1030x211-R.jpgBrittany Bailey2012-05-21 06:45:522021-07-22 03:53:01How to Remove a Stuck, Stripped or Painted Screw
You know the old saying, “No question is a dumb question.” Well, I have to say that about this tutorial, “No tutorial is a dumb tutorial.”
I realize that a caulk gun isn’t a big scary power tool, and yet I still think learning how to use a caulk gun is a very valuable skill for any handy person.
So, let’s get right down to some Caulk Talk.
How to Use a Caulk Gun
A caulk gun is a necessary tool for any homeowner. Sealing gaps in siding, replacing the seal around the tub and shower surround when the old caulk gets dry and brittle is a must. Caulking around the trim around windows and doors will improve your homes energy efficiency and get rid of unsightly gaps. You can also use it for spreading construction adhesive and any other substrate that is sold in tube form. A caulk gun saves your hands from cramping, especially if you have a lot of caulking to do.
A basic caulk gun costs about $10 – $20, but you could buy a power version which run up to $200! Sheesh!
Starting a tube of caulk:
Cut off the tip of your tube by inserting it into the hole at an angle.
Poke the stick attached to the gun into the tube to puncture the seal.
Loading a caulk gun:
Pull the hooked rod all the way back. Insert your tube base first. Then tilt the nozzle end into the top of the gun.
Rotate the hook so it is facing up and the teeth are facing down.
Pull the trigger and you’re good to go!
Be prepared to pull the hook rod back when you finish or the caulk will continue to flow out of the nozzle.
Watch these videos for more details on using a caulk gun (also called a caulking gun) and why it is important to fill any cracks or seams in your siding!
https://prettyhandygirl.com/wp-content/uploads/2012/01/caulk_gun.jpg341525Brittany Baileyhttps://prettyhandygirl.com/wp-content/uploads/2021/07/PHG-logo-tagline-2020-1030x211-R.jpgBrittany Bailey2012-01-13 07:00:292021-08-06 16:09:55Tool Tutorial Friday – How to Use a Caulk Gun