bronze_rubbing_cabinet_hardware

Have you ever fallen in love with two different cabinet hardware? But, you worried that your friends and family might have you arrested by the non-coordinating home accent police? No? Okay, so maybe it was just me. Enter this Rubbed Bronzing Cabinet Hardware post….you are going to love this.

(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)

I fell in love with these glass knobs. Read more


Faux Zinc Painted Chalkboard File Cabinet

This summer I was thrifting with a few friends and stumbled across an ugly cabinet at the Goodwill. The metal chest had extra wide and deep storage, but the worst colors imaginable! The hot pink and mint green were disguising the true potential of the chest, but like a color-blind dog, I was able to see beyond its garish appearance. In my mind, I pictured a vintage metal cabinet with a faux zinc side and chalkboard drawer fronts.

I scooped it up and brought it home. Then the poor chest sat in our garage for months and months until I had a chance to work a little spray paint magic and turned it into….this thing of beauty:

Yes, that is the same chest of drawers! You could do the same transformation.

Materials:

(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)

Instructions:

Clean off the drawers. Remove any dirt or debris (I actually had to use a little Goo Gone to get rid of some sticky residue. But, lemon essential oil will also work for this task.)

Remove the drawers from the chest. Tape over the drawer glides and slides. Mask off the drawer sides and insides by covering the drawers with tape and craft paper, leaving only the drawer fronts exposed.

Spray paint the chest and drawers with automotive primer. (I prefer the automotive primer because it sticks to metal and can withstand a lot of abuse.) Let it dry.

Spray paint the drawers with chalkboard paint. (Use three fine coats of paint instead of one or two heavy coats.) Set them aside to dry.

Adding a Faux Zinc Texture:

This is the most exciting part of the tutorial. I created this technique by trial and error and I’m excited by how well this method works for creating a faux zinc texture.

Getting a faux zinc texture is really easy. Just have some gloves on and use a crumpled up piece of craft paper. (A loose crumple works best.)

Spray paint the chest with a thick coat of the hammered silver spray paint, (but not so thick that it runs). Let the paint get tacky by waiting a few seconds. Then use the crumpled piece of craft paper to blot into the wet paint.

Work in small 1 foot sections and pounce the paper a few times. (Too much pouncing and you’ll lose the large textured pattern.)

Let the cabinet dry thoroughly.

Insert the chalkboard drawers back into the cabinet frame.

Add chalkboard art to your drawer fronts.

This metal chest of drawers is the perfect size for my large tablets of art paper.

The cabinet has a wonderful texture now.

I have the flexibility to move my art supplies around and just change the chalkboard label.

Did I mention this little chest is the perfect height to rest my palette on while painting.

I’m soooo thrilled with the results!

Last month, I was a little nervous to try a new power tool. I know…I know…shock and disbelief! But, y’all came to my rescue and helped share all your tutorials for using the Silhouette and other craft cutters. You really have to see all the wonderful projects that were linked up, like Atta Girl’s Tricycle Chair:

And Vintage Revival’s Wood Grain Lamp:

and I yelled “Stick a Fork in Me I’m Done Procrastinating!” when I laid eyes on All Things Thrifty’s Knife and Fork curtains:

After reading all your project tutorials, I was able to get a handle on my fear of the unknown and try out the Silhouette. Read more

How to Make New Wood Look Old, Weathered and RusticHow to Make New Wood Look Old, Weathered and Rustic

I have a confession to make. All the wood that you saw on my art studio wall is not exactly old or salvaged. Will you forgive me if I share with you the Secret to Make New Wood Look Old, Weathered and Rustic? 

In order to have enough wood, I had to buy some new pine boards off the shelf at Lowe’s. I actually chose furring strip boards because they are already chewed up and imperfect.

But, I also grabbed a few other supplies:

Optional: General Finishes Flat Out Flat Top Coat to protect furniture.

(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)

The Secret of Weathered Boards: 

Old rustic boards are gray and have enhanced grain and plenty of dings and character. Replicating that look can be tricky unless you have the right tools, glazes, and a few tricks up your sleeve.

I wrote another post about aging and antiquing that shares some other techniques, but today I’ll focus solely on making new lumber look old.

Weathered boards have a warm gray color. To create this color I stained the boards with Rustoleum sunbleached. Then wiped off the excess.

Next I added a little Minwax Early American and wiped it off.

The results are the blue-gray weathered look. For more dimension and detail try adding the glazing technique described below.

 

My Secret Rustic Glaze Formula:

UPDATE: Valspar stopped making the products I originally used. I’ve tried a lot of alternatives, and settled on General Finishes Van Dyke and Pitch Black glazes to get the same look. The good news is that you don’t need the additional clear mixing glaze.

There is nothing in this world more beautiful to me than rustic barn wood. Those dark chocolate timbers that look like they’ve been gathering dirt for decades are gorgeous in my eyes.

To fake this look I created a glaze that works wonders when wiped over new lumber.

Mix 2 parts Van Dyke glaze and 1 part Pitch Black glaze.

Secret Formula to Age Wood

Mix thoroughly. The resulting color should be a very dark chocolate color. Adjust your color by adding more VanDyke or more Pitch Black.

Dip your flat brush into the glaze and drag it over the wood. The glaze really accentuates the grain in the wood.

Shake or tap the brush on a stick to give your lumber age freckles.

For more uniform color, brush the glaze over the entire board (don’t forget the ends of the wood.)

Rub the glaze into the wood and wipe off any excess.

Take a look at the difference:

Not bad, did you know this farm crate sign is brand spankin’ new?

I hope I fooled you. Here’s the tutorial for making the farm crate sign.

In the meantime, have fun aging those new boards! I’d love to hear if you try these techniques and how they worked for you.

How to Make New Wood Look Old

Hey y’all. I’ve been busy painting my hair gray. Well, I’m not trying to, but painting the bonus room with its angled ceilings has resulted in a lot of gray highlights. Even Buddy got in the action:

So, while I’m busy googling how to remove paint from dog hair, I hope you’ll enjoy this tutorial I created for building these cubby display shelves using a shipping pallet and a vintage bread crate. My cost was zero because I had all the materials and tools. But, even if you have to buy some of the materials, it should be a relatively inexpensive project. And the best part about this project is that I didn’t use any nails or screws to create it! Read more