DIY Rosemary Wreath & Juniper Garland | Pretty Handy Girl

DIY Rosemary Wreath & Juniper Garland | Pretty Handy Girl Winter is upon us and with the temperatures dropping we have our windows closed and doors shut. Thus sealing in the stale air and odors. Not to mention cold and flu viruses. Ugh. But, I have a few easy and inexpensive tips to give your home beautiful natural scents and cleaner air. DIY Juniper Garland Tutorial: As I was driving through our local shopping center last week, I spotted several juniper bushes that were ripped out of the ground by the landscapers. It was obvious they were getting rid of them. I did what any resourceful crazy DIYer would do and filled my trunk full of the bushes. juniper-filled-trunk I was just about to drive away as one of the landscapers hailed me down. I totally thought I was about to be reprimanded. Gulp. But, he asked me if I knew they were dead. I laughed and said it didn’t matter because I was going to make garlands out of them. He then showed me the location of the three dumpsters full of more juniper I could have for more garlands! Score one for the crazy DIY lady! If you don’t have free landscaping waste at your disposal, you can use any trimmings from pine and evergreen type bushes.   Materials: DIY Rosemary Wreath & Juniper Garland | Pretty Handy Girl

(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)

Instructions: Put on your gloves. Cut your trimmings into manageable sections. Layer clumps together. DIY Rosemary Wreath & Juniper Garland | Pretty Handy Girl Wrap a small piece of floral wire around the clump to secure them. (I should have worn gloves, I totally regretted my actions after having many tiny cuts on my hands.) Continue adding to create a garland rope. DIY Rosemary Wreath & Juniper Garland | Pretty Handy Girl Secure the garland rope to your bannister, mailbox, mantle or wherever you want to decorate with holiday greenery. I used more floral wire to attach the garland to our banister. DIY Rosemary Wreath & Juniper Garland | Pretty Handy Girl Then I added some pretty bows. I wish my blog had smell-o-vision because these juniper garlands have a fresh evergreen scent. DIY Rosemary Wreath & Juniper Garland | Pretty Handy Girl Not bad for free greenery!!!

page_break_2 Rosemary Star Wreath Tutorial: Making a rosemary wreath is almost as easy as making a garland, but on a smaller scale. If you have a fresh rosemary bush, you can use trimmings from it for this project. If not, now’s the time of year to purchase little rosemary trees at your grocery store. Materials:

  • Fresh rosemary
  • Scissors
  • Floral wire
  • Wire cutters
  • Copper pipe (or a coat hanger will work)
  • Fishing line

Optional: Plumbing strap for hanging Instructions: Form your copper wire into a star shape. Wrap (or solder) the ends together. DIY Rosemary Wreath & Juniper Garland | Pretty Handy Girl Use small pieces of floral wire to attach rosemary springs to the star shape. Add a plumbing strap on top and feed fishing line through the hole in the strap. DIY Rosemary Wreath & Juniper Garland | Pretty Handy Girl Hang your rosemary star wreath and enjoy the heavenly scent of rosemary in your kitchen throughout the season. DIY Rosemary Wreath & Juniper Garland | Pretty Handy Girl It’s beginning to look a lot like Christmas around here! DIY Rosemary Wreath & Juniper Garland | Pretty Handy Girl

page_break_2

Cleaning the Air in Your Home: Having the doors and windows closed in the winter helps keep your home warm. But, it also traps odors and makes the air in your home stale. You know who else is trapped indoors? Viruses and germs are also trapped inside! Besides frequent hand washing, you can improve your odds of staying healthy this winter by changing your air filters.Use a good quality Filtrete brand filter to trap viruses and to clean your home’s air. Be sure to check your filters and change them every 1-3 months to keep your home healthy and your HVAC system running smoothly. page_break_2

PHGFancySign filtrete_brand_ambassador Disclosure: This is a sponsored post for Filtrete. I have the honor of being an ambassador for them and have been sharing information from 3M Filtrete. I was given key messages to share, but all the words and thoughts are my own.  I have been compensated for my time and for this post. I continue to work with certain companies like Filtrete that I believe in, because of their quality and because I feel they have helpful messages for my readers. I will always disclose to you if you are reading a sponsored post.

Reinforcing You Door is Easy

Reinforce an Entry Door

Burglar proofing your home is easy. Especially f you have a gazillion dollars to hire security guards, attack dogs and a web of lasers. Ahh, to dream a dream. But, for those of us who actually have a budget there’s a quick solution. And it’ll help you sleep a lot easier at night.

Having a home invasion is nerve wracking to say the least (yes, I’ve experienced this), I understand the fear many homeowners face:

A  passionate desire to keep our family safe from all the badness in the world.

Think about this, in many instances the only things stopping a robber from kicking open your front door are 1/2 inch screws, some thin metal (in the form of hinges and  strike plates), and at best a wimpy 1 inch piece of wood called your door jamb. Um, I think my 74 year old dad could kick open most people’s doors.

Today I’ll walk you through the installation of EZ Armor (affiliate link). And How to Reinforce an Entry Door and Make it Burglar Proof!

EZ Armor is a door reinforcement kit you can buy for $69. You need limited tools and 15 minutes.

Here’s a supply list to help you get started:

(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)

I promise you’ll boost your home’s safety by leaps and bounds by using EZ Armor. It only take a few minutes to understand why.

The EZ Armor kit I bought came with the following accessories:

  • Jamb shield (1)
  • Hinge shields (2)
  • Door shields (2)
  • 2 1/2 inch screws (4)
  • 3 1/2 inch screws (17)

Reinforce an Entry Door and Make it Burglar Proof

Okay, if you’re an excitable DIYer like me you might dive right into the installation. You can watch the video or read the photo tutorial below:

Read more

How to Clean Your House Exterior without a Pressure Washer or Ladder

Is your home ready for Halloween? I don’t mean decorating. I mean is it so grimy and dirty that you don’t need to decorate to scare off the trick or treaters?

How to Clean Your House Exterior without a Pressure Washer or Ladder

Umm, yup, that was my house. But, a few weeks ago I was introduced to my new CBFF (Cleaning Best Friend Forever.)

Krud Kutter Exterior Clean Up

Krud Kutter Original - My Cleaning BFF

Seriously, you can ask my sister and stepmom! I was toting around a bottle of Krud Kutter this past weekend while working on renovating a VERY dated beach condo. What? You didn’t know I was doing that?!

Pretty Handy Girl Instagrams from Topsail

Well, you NEED to follow me on Instagram to get the latest deets of my DIY life!

Anyway, back to Krud Kutter. The folks at Krud Kutter couldn’t believe I’d never used their products before. So, they offered to send me some to try. But, before I agreed, I checked with a few DIY friends like Holly.  And, they all agreed, “Oh yeah, that stuff ROCKS!” Holly says she uses it to clean grimy furniture before painting it. I figured if she likes it, I might.

Within a few days, a box containing some Krud Kutter Original and Krud Kutter House Wash showed up on my VERY dirty doorstep. I’m sure my UPS driver thinks our stoop is a disgrace. I had contemplated buying a pressure washer to clean it.

How to Clean Your House Exterior without a Pressure Washer or Ladder(That white grout you see at the top of the picture was protected under the door mat for years.)

You can imagine my skepticism that a little plastic bottle could do the same job as a pressure washer.  But, I was shocked at what happened next.

Read more

kitchen_progress_2.21.13

I can honestly say that this is the first week that I’ve felt the progress on our kitchen (besides just feeling it in my sore muscles.) And, it FEELS GOOD! No more road bumps like termites or asbestos.  I’m sure from this picture you are thinking, “What progress? When the heck is she going to put her kitchen back together?” Well, come on in and I’ll show you some of the forward movement that’s been made! Read more

learn-about-termite-damage

There we were, Harvey the electrician and I were happily making progress on the kitchen renovation. Harvey was just finishing up on the last row of outlets when his hand disappeared into the wall. “Ummm, Ms. Bailey, I think there’s something wrong with this stud.” I looked over to see him pulling wood shavings out of the hole he had cut for the outlet. “What the…..?” (I repressed my urge to curse.) Within five minutes of his discovery, we had pulled down the sheetrock around the suspicious stud and were glaring at a poor excuse for two framing members and the wall’s bottom plate.

termite_damaged_studs

The two studs were so brittle and destroyed that I was able to poke my entire finger through them. (Let’s see you do that to a solid 2×4, Mr. Houdini!)

finger_through_termite_damage

Not good…not good at all. I had to make the unfortunate call to Pretty Handsome Guy to tell him the bad news. But, I broke it to him lightly, “Honey, what is the one home disaster we HAVEN’T had to deal with yet?” He guessed tornado (Shoot, forgot about that one.) “No, Termites! But, the good news is that there is no live infestation.” See, it always helps to temper the bad with some good news. 😉

The next few days were fraught with nail biting, lightly walking around that wall (for fear it might topple over), and multiple phone calls to the termite company, our building inspector and a structural engineer. To make this long story short, the structural engineer was the most helpful and advised us to fur out our walls to carry the wall load over the remaining perfectly good rim joist. If that sounds Greek to you — no worries — I really want to share with you what I’ve learned about TERMITES instead! Read more