Make Your Own Terrariums

 

Terrariums are making a comeback in home décor. Gone are the octagonal mirrored terrariums. They have been replaced by sleak apothecary jars, tall cylinders and lidded glass vessels (to name just a few shapes.)

Twig Terrariums has an amazing array of beautiful ready made terrariums or DIY kits for sale! Some of them have stunning details, right down to a little miniature person inside the lush world. The terrarium below sells for $200.

If you want to create your own version that is a little more budget friendly, it isn’t hard to do. In fact you can get some plants from a local nursery or as close as your own backyard!

Materials:

  • Glass container (with or without a lid)
  • Small decorative pebbles or pea gravel
  • Potting soil
  • Live Moss
  • Terrarium plants (small shade loving plants)
  • Potting shovel
  • Water

1. Clean your glass container with soap and water and dry it.

2. Add a layer of gravel or decorative pebbles to the bottom of your glass container.

 

3. Add a layer of potting soil. No need to level it.

 

4. Collect your plants and think through the plant placement in your head.

 

5. Gently remove a plant from the pot.

If it is root bound (all the roots are wound tightly around the bottom) gently tease some of the roots free and break apart the roots at the bottom of the plant.

 

6. Insert your plants into the soil.

Put taller plants at the back and the shorter ones in the front so you can see all the plants.

 

7. Cover the soil with moss. You can cut or tear pieces to fit flush with the edge of the terrarium.

8. Fill your terrarium and let the water soak in. The water should reach the top of the rocks. Check the water level a few times a week and be sure to refill when the water gets low. If your terrarium has a lid you won’t have to water as often as a lidless variety.

 

9. Add any decorative embellishments like these faux mushrooms (tutorial HERE)…

…or my sons’ favorite, a little plastic dinosaur!

Terrariums make the perfect year round accessory. I have them prominently featured in my living room along with some other natural elements.

This version was made entirely with plants that I have growing in my shade bed. Small ferns, arugula and creeping ground covers. Plus, I added a few round pebbles for visual interest.

I might pick up a tiny person or two at a hobby shop next time I’m near one. Anyone seen any that look like the characters in “Land of the Lost” heh, heh, heh!


In the meantime, I’m loving my cost effective terrarium. Yes, terrarium singular, because the cylinder terrarium was a gift for our friends who dog sat for us.


I almost wouldn’t be surprised to see a fairy take up residence in one.

I’ve been busy working on some more projects to show you, so hang tight and check back soon! 😉 In the meantime, I hope you have a fabulous weekend and are enjoying Fall!

 

Today I am going to show you how to Make Your Own Fall Wreath. If you’ve been following me for long, you were witness to my one wreath with many different looks for one year. Well, I’m ready for a change. So, I decided to create something completely different.

When I think of fall, I think of cooler weather, sweaters, autumn leaves and flowers. This wreath encompasses all those elements.

Lucky for me I had all the materials on hand. Especially the XL cable knit sweater that I picked up at Goodwill thinking I could make sweater vases out of it.

Materials:

(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)

Instructions:

Start by cutting off the sleeve of the sweater.

Cut, the sleeve in half lengthwise. Then put the right sides together.

Stitch the ends together (try to line up the stripes or cable knitting.) Trim off any excess.

Open your sleeves up to give you one long length of sweater material.

Preheat the hot glue gun. Lay the wreath form on top of the sweater material.

Put a bead of hot glue on the back side of the wreath form and glue one edge of the sweater material to the wreath.


Squeeze out another bead of hot glue, wrap the other side of the sweater material up and glue it against the already glued piece.


Realistically, this is the backside of the wreath, but if you have a see through door like I do, you will want to roll under your raw edges to hide the seams.


Work in 3-4″ sections, adhering one side and then the other until you reach the end of your wreath. Cut your sweater material slightly longer than you need, then roll under the raw edge and glue it down.


Your wreath should resemble something like this:


Hot glue some leaves onto the wreath covering one of the seams.


Then add some flowers. And more leaves, and more flowers, until you have burned your fingers to smithereens!


Next tie one loop of ribbon to cover the top seam.


Tie more ribbon to the loop to give your wreath a more “substantial” bow.


And now you have a warm, cozy and colorful fall wreath! What do you think? I just want to snuggle up to it every time I walk through the door.


Have you started to decorate for fall? Do you have your wreath yet? I’d love to hear about your unique wreath project. And if you need more ideas, enjoy these 24 more Fall wreath ideas:

24 Creative Fall Wreaths | Pretty Handy Girl
Y’all have a fabulous weekend!

 

Are you as nutso about paint chip projects as I am? I’m semi-worried that I might get arrested next time I’m pulling samples at my local paint department. Is there a law against taking too many?* Okay, so let’s just say that I have collected many samples over the years while contemplating room colors (which is true!)

*Paint chips may be free, but please use consideration when taking paint chips. Try not to take more than 2-3 of each color and definitely don’t take the last of a color. It might be a good idea to ask permission from the paint store employee if you need to take more than a dozen.

But, what do you do with all those left over paint chips once you have decided on your color? It seems a shame to throw them away, doesn’t it.

Why not use them to make a lamp shade?

I actually saw this lamp shade on JossandMain.com last week and thought, “Ooo Ooo Oooo! This gives me an idea of what to make with all those paint chips!”

Materials:


  • Lamp shade (best if it isn’t tapered)
  • Paint chips
  • Clear packing tape
  • White paper tape (low stick)
  • X-acto knife
  • Cutting surface
  • Metal ruler
  • Hot glue gun and glue sticks

Tutorial:

Start by laying out your paint chips side-by-side and organize them any way you like.

To judge how many strips you need, rest the seam of your lamp shade on the end of the paint chips and roll it until you reach the seam again. If you still have paint chips under your shade, then you have enough! I had one small gap leftover, so I added two of the same colored chips together so the small strip wouldn’t be as noticeable.

Butt the paint chip strips tightly together. Put paper tape on top of the chips to hold them together.

Gently turn them over and tape the seams with clear packing tape.

Once all the strips have been taped together, trim off the excess tape.

Measure the height of your lampshade and trim your paint chips to the same height.

Test fit your paint chip roll.

Use your hot glue gun to run a line of glue on the seam of your lamp shade. Glue the end of the paint chips to the shade.

Run a line of hot glue on the top and bottom edges of the lampshade and roll the paint chips around the shade. Secure the end by hot gluing it to the shade.

And that is it! A super easy and very colorful home decor project.

I think it is beautiful whether the light is off…

…or on.

When choosing the paint swatches you wish to use, try pulling colors from a painting or use colors that are compliments to your wall color.

What?! You still want more paint chip home décor ideas?! How about a whole round up of them? Go ahead and scoot your index finger on over to Parentables for 11 Paint Chip Projects to see 9 more amazing paint chip projects:

I guarantee, you’ll never pass through the paint department without grabbing a few paint chips again!

creative-gift-wrapping

Paint chip present wrapping
I’ve officially caught the paint chip bug! How about you? Have you seen all that can be done with those FREE* paint chips?! The possibilities are almost endless. (*Please use consideration when taking paint chips. Try not to take more than 2-3 of each color and definitely don’t take the last of a color. It might be a good idea to ask permission from the paint store employee if you need to take more than a dozen.)

As I was getting ready to wrap a present for a little birthday girl, I lamented the fact that I was tired of the two rolls of wrapping paper we had (not counting the dozen or so that are Christmas related.) Then, I came up with the idea to wrap the present in paint chips. I was probably influenced by the tiny gift boxes that How About Orange made a while ago.

Here are the materials you will need:

  • Paint chips (used Behr brand from Home Depot)
  • Clear packing tape
  • White artists tape (I wish this tape was a little stickier though.)
  • X-acto knife
  • Pencil
  • Scissors
  • Ruler
  • Ribbon
  • Gift box to be wrapped

Instructions:
Start by laying out the chips on one side of the gift box. Overlap where the chips meet so the box won’t show. And allow the chips to overlap the sides of the box slightly.

To keep the chips in the same position, lightly tape them together with artist’s tape before lifting them off the present.

Gently turn over the chips and tape all the seams with the clear packing tape. Repeat the above steps for the other three sides (do not create a panel for the top or bottom of your present yet.)

Lay the gift on top of the taped chip panel and draw a line along the edge of the box.

Using an X-acto knife, cut two opposing panels at a time (since they should be the exact same measurements.)

Assemble a panel for the top of the gift box. Only this time, allow more of the chips to extend over the sides (preferably 1/4 – 1/2 inch) on three sides. The fourth side should be flush with the edge of the box.

Fold over the edges of the overlapping chips to fit snug against the box.

Make a cut into each of the overlapping corners as shown:

Fold the corners in and tape them to create your box top. Note that one edge does not have a folded side.

Tape all four of your box sides together so it creates one long rectangle. Then tape the top of the box to the top of the second panel where there is the open side.

Lift the sides up and set your box into the top (upside down.) Fold the sides in around the gift box.

Make sure your panels fit relatively snug around your present. Then remove the gift box. Tape the lid of the paint chip wrapping to the sides of the wrapper. And put a piece of tape inside the seam where the sides meet.

Now you can slide the paint chip wrapper over your gift box (right sides up.)

Make the bottom panel to your paint chip rapper exactly like you did for the sides by trimming off the excess. Then lay it onto your paint chip wrapped box. Take your white artist’s tape and tape all the seams of your box.

Fold over the corners neatly.

Your wrapped present should look like this:

Wrap a pretty bow around the present and attach another paint chip (I punched some decorative holes in this one.) Write a little message and you are finished.
Paint chip present wrapping

Now watch the gift recipient ooh and ahh over this unique and beautifully wrapped present!


I thought this present would be perfect for a shower gift. Or a graduation present using the graduate’s school colors?! And using red and green chips would be perfect for a Christmas present. I can’t wait to try this again sometime soon.
If you love paint chip projects, I’m creating a round up of projects for Parentables. I’ll share the link with you on Thursday!

 

 

P.s. Don’t forget to enter the Wagner Power Plus Paint Sprayer giveaway! A winner will be chosen at random on Friday, September 16th!

Sharpie just sent me a new line of markers they just released. They are called Stained by Sharpie. The markers are permanent fabric markers and let you get creative on anything fabric, canvas or cloth.

They couldn’t have arrived at a better time. The kids were home for summer break and were itchin’ for something fun to do.

I pulled out some old t-shirts I had stored away to tie dye (several of them had stains on them. So, I had planned to renew them anyway.)

The shirts are easiest to draw on if they are stretched taut over cardboard.

I decided it would be fun to let the boys decorate a baby shirt for their new little niece who will be born in September.

I drew out my words with pencil on the baby shirt. Then started using the Stained markers.

The markers are very easy to use. They will drag or bleed on the fabric if you use too much pressure. But, if you draw lightly and quickly they are just like using a pen.

I doodled flowers and a design using black, purple and green.

Then carried the design over to the back (including a strategically placed bee covering up what might have been a spit up stain. Shhhh, don’t tell my sister.)

Then I called in my little Picassos and turned them loose.

They really had fun coloring in the lines. They left no section of shirt uncolored. (Aren’t band-aids just the cutest on little kid fingers. It makes me want to kiss the little boo boo.)

Our only complaint (being the artistic family that we are) is that we really wanted more colors! A light blue and light green would be nice. With all the colors regular Sharpies have, we hope the company will not disappoint and will soon have the same rainbow of assortment for the Stained Fabric Markers.

I gave the shirt to my sister for the new baby while I was visiting her. She already washed it once and reported that the ink held up just fine.

Isn’t this a cute keepsake for a new cousin? We think so. What would you use Stained markers on? I’m already thinking a plain canvas tote may look nice decorated with some art.

 

Disclosure: This is not a sponsored post. Sharpie sent me a set of complimentary Stained markers to try. I was not paid for this post or told what to write. All projects and opinions are my own.