How to Make a Long Clamp with Shorter Clamps
How to Make a Long Clamp with Shorter Clamps
When you are trying to outfit your workshop with equipment it can be tempting to skip purchasing more expensive long clamps. After all, how often do you really need to clamp something longer than 12 – 18″? Luckily, I’m here to justify your decision to purchase two short clamps in place of one long clamp, because here’s How to Make a Long Clamp with two Shorter Clamps!
(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)
When it comes time to clamp that extra long project, grab two of the same brand clamps (this may also work with different brands, but you’ll just have to experiment). I use Irwin Quick Grip clamps.
Open the two clamps to the full extension. Set the grip handle side of one clamp on one side of your item to clamp.
Take the second clamp and flip it toward the opposite side, resting the handle side on the opposite side of the item.
Then set the two middle clamp pads against one another to form an “S” shape as shown below.)
Tighten the two clamps and you have one long clamp made from two shorter clamps!
Tell me the truth, did you already know about this clamp hack? I debated whether to write this post because the idea is so simple, I figured it may be nothing new.
If you didn’t know how to make one long clamp out of two smaller ones, I hope this tip helps you one day. I know it really helped me this weekend when I was trying to clamp a larger picture frame.
Do you have any helpful workshop tips to share? I’d love to hear them.
Great idea, awesome tips! I really didn’t know about this, so thanks for sharing!
Genius!
I feel dumb for not thinking of this simple trick myself! I often wish we had a longer clamp, but make due without. Now I know what to do next time!
That’s very clever! Thank you for sharing the mechanics of it.
Great idea, thanks! I did not know this.
We run into this problem frequently and I would have never thought to do this! What a genius hack!
Great hack. I did not know this. Thanks for sharing.
Perfect! Thanks so much
So clever! You don’t know what you don’t know! Thanks! 😉
This is the best tip ever!
I knew it could be done…I just didn’t know how to do it so thank you!
So wish I had read this a month ago before I bought two 24″ clamps! This is a wonderful idea, and I had an instance where I needed a third long clamp but refused to buy one. This will work perfectly. Thanks.
Awesome idea! I never thought to do that and I’ve needed longer clamps quite often. Thanks
Did not know this. Thanks.
Brilliant! Best idea ever – Thanks