During the coronavirus outbreak I started making DIY Face Masks using some of the patterns I found online, but I really didn’t like the fit, especially because I was used to my more form-fitting and comfortable masks used for carpentry or demolition. So I designed what I’m calling the “Best Fit Facemask” tutorial. It’s more form-fitted onto the face and it has adjustable elastic ties around the ears to fit a wider variety of faces.

Best Fit Face Mask Tutorial

As a general contractor and woodworker, I had searched for form-fitting and comfortable masks to protect my lungs from dust and debris and had my favorites. For that reason, I knew there were better options than most of the sewing mask patterns I found. After a weekend, I designed this easy sew Best Fit Face Mask Tutorial for use by the public and medical professionals trying to protect N95 and surgical masks while also staying safe during the COVID crisis. (These are not a replacement for N95 or surgical masks. These masks are designed to add an additional layer of protection.) Looking for a simple, stylish, and better fitting face mask? Look no further.

Face Mask Template Sizes:

After many requests, I finally have a variety of sizes. From a child size (fits approximately toddler to 5 year old) and then Small (fits youth and petite adult faces), Medium (fits most women or small men), Large (fits most men or larger women’s faces) and X-Large (fits long faces and men with beards.)

Even though you should pre-wash your fabric, the masks can still shrink slightly after the first post-construction wash. Therefore, check sizing after washing the finished mask.

Resizing: If you find the child size is too big, try printing at a 95%. Likewise, if the X-Large is still too small, try printing the pattern at 105%.


Does this mask have a filter pocket?

Filter Pockets or No Pocket, your choice! Instructions for sewing a mask with or without a filter pocket are included. In fact, it’s only one step difference. (Personally, I don’t use a filter pocket because it is harder to breathe through three or more layers.)

In addition to this pattern being easier to sew, it also uses less fabric to allow you to make more masks with the fabric you have on hand. Speaking of fabric, these are some sources for fabric in your home so you don’t have to buy anything!


(I’ve included affiliate links for your convenience. I earn a small percentage from a purchase using these links. There is no additional cost to you. You can read more about affiliate links here.)

Better Face Mask Fabric Materials:

There is some science behind the materials used for face masks. Although the tighter woven (more thread count) fabrics offer more protection, they do pose the issue of being harder to breathe through. If you want to choose the best materials for both, here is a list of best materials for making your DIY face mask when trying to prevent virus transmission.

Sources for Mask Materials in Your Home:

  • Quilter’s Cotton Fabric
  • Cotton Blend Fabric
  • Sheets or Pillowcases
  • Tea Towels (not terrycloth)
  • Fabric Napkins
  • Scarfs or Bandanas
  • Flannel
  • Dress Shirts
  • Other Cotton Fabrics
  • T-shirts (although the stretchiness makes them harder to sew.)

Nose Clip Materials:

My favorite nose clip material is the foam padded aluminum nose strip, but they are a little trickier to sew around. Second favorite are coffee bag ties (you can purchase them on Amazon or reclaim ones from coffee or donut bags.) An Instagram friend had suggested the coffee bag ties and I couldn’t be happier with the idea (thanks Nickolett!) But, despite our love of coffee, we didn’t have an endless supply of bags. And I could only make two nose clips from each bag tie.

Coffee Bag with Wire Tab Tie

If you don’t want to purchase nose clips you may have these materials laying around:

Simple cut a piece of electrical tape 3 inches long. Lay two 2.5″ pieces of wire onto half the tape and fold over the other half to seal the wire inside the tape. Trim off the ends, leaving a small amount of tape to cover the wires. Yes, these will wash fine since the tape protects the wire. But any wire clips will eventually snap when bent back and forth too many times.

Less Successful Nose Clip Materials:

These items will work, but they either didn’t have enough of a “memory” in the bend, or they weren’t as comfortable. But, if it’s all you have, use it!

  • Doubled Twisty Ties (not stong enough to hold shape.)
  • Pipe Cleaners (tend to rust and break easier)
  • Floral Wire
  • Electrical Wire
  • Triple-Layered cut-outs from foil take out containers

Adjustable Strap Materials:

I know the other materials that are hard to find are elastic, so here are a few acceptable alternatives.

The key to the Best Fit Face Mask fitting so well is the adjustable straps. Using a craft bead on the straps allows the user to adjust the mask to their face. The paracord is the hardest to thread, but I found a great way to thread the strap material through the beads. Use fishing line folded in half. Thread the loop through the bead. Thread the strap material through the loop. Then pull the fishing line back through the bead.

The t-shirt material and elastic shoelace is much easier to thread through (especially when using the fishing line technique.) If you don’t have any of the above-mentioned strap material, you can use any cord or straps, but it’s crucial that the material can move freely in the sides so the side can gather at the back of your cheek. Stationary sewn straps will cause the material to push out away from your face.

No matter what material you use for the straps, be sure to tie the ends of your straps to prevent the bead from coming off. (And melt the ends with a lighter to prevent unraveling.)

If you don’t have craft beads, a button with some craft twine can work well as a strap adjuster. Or tie a slip knot following this video tutorial.

New Strap Design for The Most Comfortable Best Fit Face Mask!

With some schools opening back up and people going back to work, I made one change to the straps of the Best Fit Face Mask turning into my favorite mask and the Most Comfortable Best Fit Face Mask! Watch the video below for more information.

My Source for Flat Foldover Elastic to Make the Most Comfortable Best Fit Face Mask: Amazon or Etsy

Face Mask Templates:

The downloadable instructions contain the templates for both a medium and large size mask. Download by clicking on the images below which will take you to the full-size templates. Make sure your printer window is set to print actual size. Do not fit to paper size. Double-check your print out by measuring the one inch box on the template.

👉 Downloadable Instructions & Medium or Large Templates Here!👈click here to download best fit face mask plans

Looking for other size patterns? Download Patterns for other sizes below:

Don’t have a printer? Click on the links to see the dimensions of the Medium Best Fit Face MaskLarge Best Fit Face Mask, or Child, Small, and XLarge Face Mask.

Now, let’s get busy making the Best Fit Face Mask and be sure to share this tutorial with your friends and family so we can kick Coronavirus’s butt!

Video Tutorial:

Watching the video tutorial is the easiest way to learn how to make the Best Fit Facemask. Enjoy!


(Download Printable Instructions and Medium & Large Templates Here)

Print these instructions with the templates at the end. Make sure to print at actual size and check the size with the one inch box on the template.

1. Cut out the templates.  Gently score along the dotted lines and fold.

Cut out face mask template and fold corners

2. Trace the outside face mask template on your fabric. I designed the templates so you can get maximum use out of your fabric when making multiple masks. It helps to fold over the fabric and cut with the long sides of the template on the fold. But, you can rotate the template to fit more cuts out of the fabric. You’ll just have to seam together the pieces on the long side.

face mask template folded or seamed visual

Lay your inside liner template onto your liner material.  Trace and cut out fabric. (Important note: Hospitals are asking for masks with different fabrics for the outside and liner so they can visually see a difference.)

If you are making a filter pocket, you’ll need two liners (but only one outside piece.) If you need to connect two pieces of fabric together on the long side, do that now making sure right sides are together. I used a very small seam allowance.

3. Fold the corners of your template and mark a line onto your fabric at the fold. Repeat this on all pieces you cut out. Stitch along all the marked corners. If your fabric is printed, be sure your right sides are together. Now trim off the excess material at the corners making sure to cut close to the stitching.

Stitch corners and trim off excess on face mask

4. Turn your outside mask material right sides out and press it with the iron. Lay the liner on top of the mask making sure the angled corners match for the nose and chin. Insert the liner fabric into the outside material and align the points and angles.

Insert Liner inside Outside Fabric

5. Then center the liner so there is an equal border of outside material around it.

center liner on outside fabric

6. Fold over the outside material 1/2 inch to slightly overlap the edge of the liner. Press and then fold over the material a second time this time over the liner.

Folder over edges twice to create binding

Adding the Filter Pocket

This next step is only for those wanting to add a filter pocket. Just know that the more fabric you add, the harder the mask is to breathe through. Fold over ¾ an inch of the material twice at the ends of the second liner. Press it with the iron. Now stitch over both sides along this the edge to tack the fold-over in place.  After stitching, insert the filter pocket on top of the liner (right side up), matching all the corner points. Then tuck it under the pre-ironed edges. If you need to, iron the edges again.

filter pocket design instructions

7. Locate the nose portion of the mask. Remember this is where you’ll be inserting the nose clip. Flatten the nose clip and tuck it under the binding of the nose. Use a clip or pin to hold the clip in place, but be careful not to put the pin all the way through the outside fabric layer so as not to add any large holes in the mask.

insert the nose clip under the top edge

8. Stitch along the edge of the fold, being careful to avoid stitching onto the nose clip. Rotate the mask and stitch along the chin side of the mask.

Flip the mask over and feel for the nose clip. Sew a few stitches to the left and right of the nose clip to keep it from sliding around in the mask.

stitch along the binding and on either side of the nose clip

9. Double fold the ends of your mask about 3/4” twice to create a pocket for the ear straps. Be sure to avoid the filter pocket if you have one.

fold over ends to create pocket for ear straps

10.  Time to grab the adjustable straps you made earlier.  Take one strap and tuck it under the fold on the end. Stitch along the edge of the fold taking care not to stitch over the elastic. Repeat for the other side.

add adjustable ear straps and stitch edge

Make sure your straps still move freely in the fold. This allows the mask to cinch behind your cheek and not pucker.

This concludes your tutorial to make the Best Fit Face Mask.

UPDATE: I created a new video showing you some time-saving tips when making the Best Fit Face Mask. Plus, I answered a lot of questions! Watch this video to save time:

Everyone, please share this tutorial! Pin it, Tweet it, Facebook Share it, or Email it! Everyone should have a good fitting face mask for protection. After the Coronavirus is gone, these masks are great for woodworking or protection from seasonal pollen and allergens.

Stay kind, stay safe!


I appreciate all the comments, but I’m spending two hours a day replying to comments and emails. PLEASE READ THESE FAQs and check the COMMENTS below for answers to most asked questions before asking.

I also hope others can help answer questions if you see one. Thank you and take care.

• Where is the template? All the instructions and templates are on this page. If you can’t find it, please check again it’s linked under the Instruction section. 

• Need Dimensions? They are included on this page. Look for the “Don’t have a printer?” link under Instructions.

• Who is selling them? This is an updated list of people who have contacted me and are selling face masks using my design.

• What size are the craft beads I used? The hole on my beads is 4mm.

• If I don’t have a bead, what can I use? Use a button and feed twine through the holes then tie them around your ear straps tight enough to hold the strap, but loose enough to be able to move the button. Or tie a slip knot (see the time saver video to learn how to tie a slip knot.)

• Can I skip the liner if using a filter pocket? At your own risk. I like to have two layers of fabric between me and the world. The filter pocket doesn’t extend all the way to the sides of the mask.

• What filter material should I use? Do your own research. Here’s a good article on options for filters.

• What material did you use for the liner? I used sheet material or a cotton curtain.

• Don’t have a particular material for this mask? I listed a variety of alternative materials on this page. There are plenty of other substitutes, but these are the ones I tried and can recommend.

• Are these washable? Absolutely. I wash mine before donating. The electric tape protects the wire from water. Frankly, the wire will break from repeated bending before it will rust.

• Is there a small or child size template? Do you have an X-Large size? YES!!! See the downloads and information for the child size, small, and X-Large above. (A child-size fits a four-year-old well but was a little too big for a two-year-old. You’ll have to play with printing the templates smaller or larger if these sizes don’t fit your needs. Or see the Time Saver Video to learn how to resize your template.

• Can’t thread your straps through the bead? Try using fishing line folded in half and feed through the bead loop first. Put strap material through the fishing line loop and pull it back through the bead. You can see a video of this process in my Time Saver Video.

• Video too fast? Don’t like the music? Keep your thoughts to yourself and download the instructions on this page. (Then you can play your own music and you can read it at your own pace.)

P.s. If you got to the end of this tutorial and still have questions, please read the comment section as many questions have been answered. I am receiving numerous questions and comments via email, YouTube, and the blog. It is impossible for me to answer all of them. 

Pin this Tutorial for future use (or to share with others!)

469 replies
« Older CommentsNewer Comments »
  1. MaryBeth Serry
    MaryBeth Serry says:

    I have been using your pattern and making masks for family and friends for many months now. The pattern is great and I’ve shared it many times. I use a nice quality white pillowcase as the lining, lingerie elastic and a Perler bead (threaded with a straight pin with a small head) and the wire in electrical tape for the nose piece. I was given some lovely material from my elderly mom and am really enjoying blessing family and friends with safety. Would love to send some photos of my masks but don’t see that option in the comments. Thank you so much for the time you spent creating this website, answering questions, and sharing you knowledge! You are the best!

  2. Brian Puck
    Brian Puck says:

    I too love your masks. Since I don’t care for looping behind my ears, I simply run one 36″ string all the way across the bottom of the mask (that goes behind my neck) and then out the top corners of the mask and tie it above and behind my head. That works great, and when I lift the upper string it hangs on my chest until I need it later that day. My wife and I made and use a couple dozen, washing them between each use. Thanks a lot.

  3. I
    I says:

    I am trying to download a child size face mask. I’ve downloaded other sizes before, but I’m getting a message to add Web Navigator. That never happened before. Is this something you have added? I’m not familiar with that and I am not comfortable adding that to my computer. I could print the medium and large patterns without this coming up. Actually, I don’t think is from you website. How do I print a child pattern. Thanks for your help. Please don’t print my reply for all to read. I don’t want to be embarrassed if it’s something I’m doing wrong.

    • Brittany Bailey
      Brittany Bailey says:

      Irene, no, you shouldn’t need to download anything other than the pdf pattern. The pattern for the child size link is directly below the big graphic of the mask that says Click Here to Download and a drawing of the mask. When you click the type “Child Size Mask” it should open the pdf in a separate tab. From there you can print it.

  4. Deborah Bush
    Deborah Bush says:

    Hi All, here’s a tip for the ear strap. You all know of the pot holder loom we used as kids to make pot holders, well I use the loops for this. Works great.
    Deb from Michigan

  5. Mary Freeman
    Mary Freeman says:

    Hi Brittany,

    Thanks to you and this awesome pattern, I now have a little sweatshop in ny living room and friends and family regularly show up with fabric in hand. Every single person who puts one if these masks on gets the big eyes, raves about the comfort, and says he or she can breathe!! Thank you so very much for sharing this pattern, instructions, and tutorials so generously.

    I tried the timesaver tips and got overly excited. After making a couple that way, I realized it would save even more time to sew the darts of all three layers together. Please tell people DON’T DO THAT!!! It is a problem for the nose wire AND for the filter. Maybe I am the only person who would try that because I do not sew except for masks and so I could not foresee the consequences.

    Thank you again for your talent and generosity. I tried ALL the patterns and this really is the BEST FIT and the MOST COMFORTABLE.

    Mary Freema
    Raleigh (also!)

  6. fitziane
    fitziane says:

    Hi, Brittany. Love your masks! I particularly love how people all look so surprised when they first put one on and exclaim, “It’s so comfortable!” Every single time. So gratifying.

    Am making masks in Egypt and raising funds for medical personnel in my native Venezuela. So far, I’ve raised 500 dollars!

    Thanks for putting this out there, and making the videos and everything.


    P.S. At some point soon, I’ll be posting about my mask making on my Spanish language blog, fitzianita.blogspot.com. I’m going to link to these instructions, but if you allow me to, I can translate them to Spanish as well.

    • Brittany Bailey
      Brittany Bailey says:

      Email me about this idea. I can’t allow you to republish the tutorial (even in Spanish) on your site. But, if you wanted to translate it, I’m happy to include the Spanish directions for download on my site.

  7. Sharon Jolly
    Sharon Jolly says:

    Hello! I am a senior I would really like to make this mask but my downloads are not working could you send me the actual measurement for making the complete mask. Sorry for any inconvenience this may cause but I really like the style. Thank you

  8. Karen
    Karen says:

    Thank you for you work on this pattern! It truly is a comfortable mask! I’ve made TONS for my family… others and my whole salon with this pattern. All agree its a comfortable breathable mask! I do use the pipe cleaner though. Have had no issues with it rusting or breaking. Sometimes I double it for mens masks
    The pony beads (genius!!) make it the best fitting mask ever…for everyone! Thanks again!

  9. Ann M Flack
    Ann M Flack says:

    This was such a fun mask to make. Thank you for the how-to video and the design idea. I made several for my son, husband and myself using old T-shirts. They were a hit.

  10. Trish
    Trish says:

    Thanks so much Brittany for sharing. I’ve made 100 masks to give away now using this pattern. Now I can source aluminium nose clips, I am no longer putting the nose clip under the top hem. I’m making a channel with binding tape so it can be removed for washing. It’s working a treat and I find it easier to sew. I simply put it in place on the fabric before sewing, and then sew into place. I end up with two sewing lines at the top of the mask that look very neat. Thanks again. You are so inspiring.

  11. Joan Elmouchi
    Joan Elmouchi says:

    Thank you for your tutorial, my mask came out great! I was making reversible masks and the pattern was quite complicated, this one is easier and fits perfectly. I have a small face and used the small size pattern. I was using jewelry wire for the nose pieces, but have found coffee bag type ties to be much more comfortable and easier to work with. Two suggestions for the original style earpieces – round ponytail elastic hair ties (The kind with the silver metal clip holding them together, they are very stretchy and can be used as is without any adjustment) and Goody Total Texture extra thick elastic (which is used for hair wrapping). That one can be cut to fit and sewn together. Both are easy to find at a drugstore with hair accessories.


Trackbacks & Pingbacks

« Older CommentsNewer Comments »

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.